datasheet datasheet optical communications systems? 10 gbps converter/repeater/wdm transponder EM316-10G-XY overview the fiber driver? xy media module family from mrv communications combines ultra high-speed protocol support with the fl exibility of multi-rate and multifunction design. xy modules are an economical alternative for enterprise applications. EM316-10G-XY modules are ideal for large telecommunications carriers moving very large amounts of data to distances beyond 100 kilometers without amplifi cation. they are compact, hot-swappable, one-slot modules with two xfp sockets and one sfp+ for modular transceivers. installation and setup is simple plug-n-play; insert the module into any powered fiber driver chassis with the xfp and sfp+ transceivers required for the application, and then connect to the network. changing a connection type at any time is simple, requiring only replacement of a hot-swappable xfp or sfp+ transceiver. the module ports support the msa standard including digital diagnostics. because the transceivers meet industry standards, a smaller inventory shared between applications maximizes the return on investment. 1 80 km 80 km EM316-10G-XY management module 1 10g converter with redundant link 2 xfp repeater active link (80 km single-mode) redundant link (80 km single-mode) local access (multi-mode) local access (multi-mode) pwr/nms tx rx dd sp p1 dd sp tx rx p3 p2 p2 p3 tx rx sp dd sfp+ access port xfp trunk redundant active pwr/nms tx rx dd sp p1 dd sp tx rx p3 p2 p2 p3 tx rx sp dd xfp link xfp link benefi ts extend fi ber optic links by hundreds of kilometers reduce capital and operating expenses highlights multiple functions in one module: - 10g redundant converter - wdm transponder data rates between 9.95 gbps and 11.3 gbps (10g ethernet/fibre channel/sonet/sdh) xfp and sfp+ ports for fl exibility and scalability - add or change optics to adjust data rates as needed - single item module inventory link integrity notifi cation (lin) loopback management through em316lnxnm-ot - command line interface (cli) - snmp management - full graphical management with megavision pro? - port feature control - digital diagnostics pseudo random bit sequence (prbs) sender/checker for connection testing hot-swap support (module and interfaces) fiber driver chassis compatibility
datasheet datasheet optical communications systems? mrv-fd-10gxy-102110 copyright ?2010 mrv communications, inc. all rights reserved. 3020101-001 rev. a4 mrv has more than 50 offi ces throughout the world. addresses, phone numbers and fax numbers are listed at www.mrv.com. please e-mail us at info@mrv.com or call us for assistance. mrv los angeles mrv boston mrv international 20415 nordhoff street 300 apollo drive business park moerfelden chatsworth, ca 91311 chelmsford, ma 01824 waldeckerstrasse 13 800-338-5316 800-338-5316 64546 moerfelden-walldorf 818-773-0900 978-674-6800 germany tel. (49) 6105/2070 fax (49) 6105/207-100 all statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. however, the accuracy or completeness thereof is not guaranteed, and no responsibilit y is assumed for any inaccuracies. please contact mrv c ommunications for more information. mrv communications and the mrv communications logo are trademarks of mr v communications, inc. other trademarks are the property of their respective holders. ordering info model number description data rate connectors EM316-10G-XY 10 gbps repeater, converter, or transponder, two universal xfp sockets, one sfp+ socket data rate independent, protocol transparent from 9.95 to 11.32 gbps xfp (x2) sfp (x1) pluggable xfp transceivers support sonet/sdh oc-192/stm-64, sonet/sdh oc-192/stm-64 with forward error correction (fec), 10 gigabit ethernet, 10 gbps fibre channel, and g.709. pluggable sfp+ transceivers support 10 gbps ethernet, fibre channel, and sonet/sdh applications. xy modules support an extremely wide range of optical infrastructure solutions including media conversion, signal repeating, lambda conversion, and wave division multiplexing (wdm). the EM316-10G-XY also off ers advanced module loopback and prbs capabilities on each interface. loopback eases the challenge of validating the installation, debugging the optical link, and fi nding potential faults on either the client or line interface. prbs provides additional circuit testing. operational modes the fiber driver xy family modules provide operational modes to change the module function for diff erent application roles. the EM316-10G-XY has two modes: 10g converter with redundant link and xfp-to-xfp converter/repeater. (see diagram on page 1.) management the em316lnxnm-ot management module provides fiber driver network administration through a command line, snmp, and megavision pro?, the mrv communications graphical network management system. the em316lnxnm-ot monitors xfp and sfp+ port status, manages module confi guration, and provides vendor information. for more information on fiber driver and other mrv products, visit http://www.mrv.com or send email to mrv sales at sales@mrv.com . physical specifi cations operating temperature range* 0 0 c to 60 0 c (32 0 f to 140 0 f) storage temperature -40 0 c to 70 0 c (-40 0 f to 158 0 f) relative humidity 85% maximum, non-condensing approximate dimensions 25 mm x 75 mm x 175 mm deep (1 x 3 x 7 deep) approximate weight 213 g (7.5 oz) regulatory compliances fcc part 15 (class a); ic (class a); emc directive: emission (class a) and immunity; rohs directive; china rohs; reach directive; weee directive; the quality management system is certifi ed to iso 9001 by qmi-sai global the environmental management system is in compliance with iso 14001 *operating range listed is for the module only. oper ating range of pluggable interface(s) used may diff er.
|
